Skip to main content
Помощ за почистване на твърди настилки

Поставяне на четката за твърди повърхности

By декември 20, 2021януари 24th, 2022No Comments

Learn how to install the hard floor brush roll.

When you are converting your machine to clean hard surface floors, you first need to remove the power nozzle, or head of the machine, and the outer bag. Then, remove the Waste Tray from the MSSS. To remove the carpet brush roll and insert the Rotary Mop, turn the MSSS nozzle belt handle clockwise until the green arrows line up. Turn the nozzle upside down and pull on the belt until it’s lose and remove the carpet brush roll. Take the belt off the carpet brush roll and place it onto the Rotary Mop. Once the belt is on the appropriate brush roll, insert it back into the MSSS. Push up on the belt with your finger and turn the belt lifter handle counterclockwise until the red arrows line up. Raise the unit by pressing all the way down on the toe-touch pedal. Then, connect the hooks on the back of the MSSS to the attaching bar. Push the MSSS up against the unit, turn the Accessory Lock clockwise, and turn the belt lifter clockwise until the green arrows line up. Lower the hood and put it on the waste tray.

Related articles

Made in America for over 100 years

Avalir 2

Avalir 2
Support
Register Kirby System

Owner Support

FAQ
How-To Videos
My Account

Contact Us

+216 (0)40 3629 4753
hello@themenectar.com